Tugas VLAN Routing

M. Septian Maulana

09.41010.0170

Jawaban dari permasalahn tersebut adalah:
VLAN IP Host IP Gateway
Vlan 2 (Rektor) 192.168.1.1/29 192.168.1.2
Vlan 3(Pembantu Rektor) 192.168.3.1/29 192.168.3.6
Vlan 4(Dekan) 192.168.5.1/29 192.168.5.6
Vlan 5(Kajur) 192.168.7.1/28 192.168.7.14
Vlan 6(Administrasi) 192.168.9.1/26 192.168.9.62
Vlan 7(Dosen) 192.168.11.1/24 192.168.11.254
Vlan 8(Asisten) 192.168.13.1/25 192.168.13.126
Vlan 9 (h. Rektor) 192.168.2.1/24 192.168.2.254
Vlan 10(h. Pemb. Rektor) 192.168.4.1/24 192.168.4.254
Vlan 11(h.Dekan) 192.168.6.1/24 192.168.6.254
Vlan 12(h. Kajur) 192.168.8.1/24 192.168.8.254
Vlan 13(h.Admin 192.168.10.1/24 192.168.10.254
Vlan 14(h.Dosen) 192.168.12.1/24 192.168.12.254
Vlan 15(h. Asisten) 192.168.14.1/24 192.168.14.254

Konfigurasi switch server 1
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vtp mo se
Device mode already VTP SERVER.
Switch(config)#vtp domain Ferdian
Changing VTP domain name from NULL to Ferdian
Switch(config)#vtp password arief
Setting device VLAN database password to arief
Switch(config)#vlan 2
Switch(config-vlan)#name rektor
Switch(config-vlan)#ex
Switch(config)#vlan 3
Switch(config-vlan)#name pembrektor
Switch(config-vlan)#ex
Switch(config)#vlan 4
Switch(config-vlan)#name dekan
Switch(config-vlan)#ex
Switch(config)#vlan 5
Switch(config-vlan)#name kajur
Switch(config-vlan)#ex
Switch(config)#vlan 6
Switch(config-vlan)#name admin
Switch(config-vlan)#ex
Switch(config)#vlan 7
Switch(config-vlan)#name dosen
Switch(config-vlan)#ex
Switch(config)#vlan 8
Switch(config-vlan)#name asisten
Switch(config-vlan)#ex
Switch(config)#vlan 9
Switch(config-vlan)#name hrektor
Switch(config-vlan)#ex
Switch(config)#vlan 10
Switch(config-vlan)#name hpembrektor
Switch(config-vlan)#ex
Switch(config)#vlan 11
Switch(config-vlan)#name hdekan
Switch(config-vlan)#ex
Switch(config)#vlan 12
Switch(config-vlan)#name hkajur
Switch(config-vlan)#ex
Switch(config)#vlan 13
Switch(config-vlan)#name hadmin
Switch(config-vlan)#ex
Switch(config)#vlan 14
Switch(config-vlan)#name hdosen
Switch(config-vlan)#ex
Switch(config)#vlan 15
Switch(config-vlan)#name hasisten
Switch(config-vlan)#ex

Switch(config)#int range f0/1-5
Switch(config-if-range)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up
Switch(config-if-range)#switchport mode trunk
Switch(config-if-range)#sw tr native vlan 1
Switch(config-if-range)#end

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]

Konfigurasi switch sisi rector:
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vtp mo cl
Setting device to VTP CLIENT mode.
Switch(config)#int fa0/1
Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/3
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 2
Switch(config-if)#end
Switch#
%SYS-5-CONFIG_I: Configured from console by console
wr mem
Building configuration…
[OK]

Konfigurasi Switch sisi Pembantu Rektor:

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vtp mo cl
Setting device to VTP CLIENT mode.
Switch(config)#int fa0/2
Switch(config-if)#sw mo tr

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/3
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 3
Switch(config-if)#ex
Switch(config)#ex

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]

Konfigurasi Switch sisi Dekan
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vtp mo cl
Setting device to VTP CLIENT mode.
Switch(config)#int fa0/2
Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/4
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 4
Switch(config-if)#ex
Switch(config)#ex

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]

Konfigurasi Switch sisi Kajur
Switch#en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vtp mo cl
Device mode already VTP CLIENT.
Switch(config)#int fa0/1
Switch(config-if)#
%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (4), with Switch FastEthernet0/3 (1).

Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/4
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 5
Switch(config-if)#ex
Switch(config)#ex

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]
Konfigurasi Switch sisi Adminsistrasi
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/1
Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/4
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 6
Switch(config-if)#ex
Switch(config)#ex

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]
Konfigurasi Switch sisi Dosen
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/1
Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/4
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 7
Switch(config-if)#ex
Switch(config)#ex

%SYS-5-CONFIG_I: Configured from console by console
Switch#wr mem
Building configuration…
[OK]

Konfigurasi switch sisi Asisten:
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/1
Switch(config-if)#sw mo tr
Switch(config-if)#sw tr na vlan 1
Switch(config-if)#ex
Switch(config)#int fa0/4
Switch(config-if)#sw mo acc
Switch(config-if)#sw acc vlan 8
Switch(config-if)#ex
Switch(config)#ex
Switch#
%SYS-5-CONFIG_I: Configured from console by console
wr mem
Building configuration…
[OK]

Konfigurasu Router
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0.2
Router(config-subif)#enc dot 2
Router(config-subif)#ip address 192.168.1.2 255.255.255.252
Router(config-subif)#ex
Router(config)#int fa0/0.3

%LINK-5-CHANGED: Interface FastEthernet0/0.3, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.3, changed state to up
Router(config-subif)#enc dot 3
Router(config-subif)#ip address 192.168.3.6 255.255.255.248
Router(config-subif)#ex

Router(config)#int fa0/0.4
%LINK-5-CHANGED: Interface FastEthernet0/0.4,
Router(config-subif)#enc dot 4
Router(config-subif)#ip address 192.168.5.254 255.255.255.0
Router(config-subif)#ex

Router(config)#int fa0/0.5
Router(config-subif)#enc dot 5
Router(config-subif)#ip address 192.168.7.14 255.255.255.240
Router(config-subif)#ex

Router(config)#int fa0/0.6
Router(config-subif)#enc dot 6
Router(config-subif)#ip address 192.168.9.62 255.255.255.192
Router(config-subif)#ex

Router(config)#int fa0/0.7
Router(config-subif)#enc dot 7
Router(config-subif)#ip address 192.168.11.254 255.255.255.0
Router(config-subif)#ex

Router(config)#int fa0/0.8
Router(config-subif)#enc dot 8
Router(config-subif)#ip address 192.168.13.126 255.255.255.25
Router(config-subif)#ex

Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#wr mem
Building configuration…
[OK]